The John Deere 4310 is a compact tractor from the John Deere 4000 Ten series. It was manufactured by John Deere in Augusta, Georgia, the USA from 2002 to 2004. This model is available in 2WD and 4WD versions. It replaced the previous model John Deere 4300 with reformed features.
John Deere 4310 tractor has a Yanmar 3TNE84 3-cylinder liquid-cooled 92 ci [1.5 L] diesel engine. It produces 31.2hp power at a rated RPM of 2600. The liquid-cooled engine needs 5.7 liters of coolant. The tractor is equipped with a partially synchronized SyncShift transmission system. This provides nine forward speeds and three reverse speeds. The oil capacity of the transmission is 23.8 liters.
This compact utility tractor offers manual and hydrostatic power steering, wet disc brakes, and useful attachments. It contains a 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank. If you want to know more about the John Deere 4310 tractor, read below its specifications, features, price, etc.
General Specifications of John Deere 4310 Tractor
|Model||John Deere 4310|
|Length||117 inches [297 cm]|
|Width||50 inches [127 cm]|
|Height||53.3 inches [135 cm] (Hood) 82.4 inches [209 cm] (fixed) (ROPS) 90 inches [228 cm] (folding)|
|Wheelbase||68 inches [172 cm]|
|Weight||2,600 lbs [1179 kg] (2WD) 2,900 lbs [1315 kg] (4WD)|
|Fuel tank capacity||Gasoline – 34 gallons LP Gas – 45 gallons Diesel – 34 gallons (80 percent full)|
|Ground clearance 2WD turn radius:||13.4 inches [34 cm] 7.5 feet [2.3 m]|
|Drawbar capacity||562 lbs [254 kg]|
|Front axle load||1,588 lbs [720 kg]|
|Rear axle load||4,410 lbs [2000 kg]|
|Steering||Full power, hydrostatic type, provision for manual operation|
|Engine||Yanmar 3TNE84 diesel 3-cylinder liquid-cooled 92 ci [1.5 L]|
|Power (Gross)||31.2 hp [23.3 kW]|
|Bore/stroke||84.0 mm X 90.0 mm (3.31 in X 3.54 in)|
|Starter power||1.9 hp [1.4 kW]|
|PTO (claimed)||27 hp [20.1 kW]|
|Oil capacity||4.5 qts [4.3 L]|
|Coolant capacity||6 qts [5.7 L]|
|Engine (gross) power||31.2 hp [23.3 kW]|
|PTO (claimed)||27 hp [20.1 kW]hydraulically actuated|
|Hydraulic Type||Open center|
|Capacity||6.3 gal [23.8 L] (gear) 6.8 gal [25.7 L] (hydro)|
|Pressure||2500 psi [172.4 bar]|
|Pump flow||8.6 GPM [32.6 lpm]|
|Steering flow||5.3 GPM [20.1 lpm]|
|Total flow||13.9 GPM [52.6 lpm]|
|PTO type||Independent 540-1,000 rpm rear, 1,000 rpm front|
|Transmission Type||Partially synchronized|
|Gears||9 forward and 3 reverse|
|Oil capacity||25.2 qts [23.8 L]|
|Rear lift||(at 24″/610mm): 2,200 lbs [997 kg]|
|Fuel||10 gal [37.9 L]|
|Hydraulic system||6.3 gal [23.8 L] (gear) 6.8 gal [25.7 L] (hydro)|
|Front axle||4.7 qts [4.4 L]|
|Chassis||4×2 2WD 4×4 MFWD 4WD|
|Cab||Two-post ROPS. Foldable ROPS (Optional)|
|Charging amps||40, 55 (optional)|
|Battery||12V, CCA 500A|
|Ag front||5.00-15 (2WD) 7.00-14 (4WD)|
|Attachments||60″ Mower deck, 72″ Mower deck, Loader, Backhoe|
Features Of John Deere 4310 Tractor
John Deere 4310 is a compact utility tractor developed by the John Deere company in the USA. It is a good quality tractor with great features. Here are the key features of the John Deere 4310 model tractor.
The John Deere 4310 model is equipped with Yanmar 3TNE84 diesel 3-cylinder liquid-cooled 92 ci [1.5 L] engine. The naturally aspirated engine has a dry air cleaner system and produces a gross power of about 31.2hp. The engine’s bore stroke is around 84.0 mm X 90.0 mm (3.31 in X 3.54 in). And Its compression rate is 18.5:1. It has a rated RPM of 2600, 12 starter volts, and 4.5 qts [4.3 L] qts oil capacity.
John Deere 4310 is provided with a partially synchronized SyncShift transmission system. The tractor has 9 forward and 3 reverse gears. Its transmission system has an oil capacity of 25.2 qts [23.8 L] with low viscosity HY-Gard oil type.
The John Deere 4310 model tractor provides a negative ground alternator charging system with 40 charging amps.
John Deere 4310 tractor has an open center type hydraulic system with a capacity of 6.3 gals [23.8 L] (gear) 6.8 gal [25.7 L] (hydro). It produces pressure of around 2050 psi (141.3 bar) and 5.4 GPM (20.4 LPM) of pump flow. This tractor has a steering pressure of 2050 psi (141.3 bar) and a steering flow of 4.2 GPM (15.9 LPM).
The John Deere 4310 is equipped with hydrostatic power steering and wet disc brakes. There is a two-post ROPS or foldable ROPS (optional) and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank. The tractor comes with many useful attachments. The main attachments are Mid-mount John Deere 60” and 72” (1,520 mm) mower deck with 3-blades. It also has John Deere 420 loader, John Deere 430 loader, and John Deere 48 backhoe.
Pros Of John Deere 4310 Tractor
- It is a reliable and good quality tractor with a 31.2 hp [23.3 kW] Yanmar engine.
- The driver’s compartment (ROPS) is comfortable and safe in this tractor.
- John Deere 4310 offers a partially synchronized SyncShift transmission system.
- It is available in 2W and 4W versions with hydrostatic power steering.
- The tractor has a John Deere 430 front loader, a 60” and 72” mower deck, and John Deere 48 backhoe.
- It offers an open center type hydraulic system to provide a constant flow of oil to power steering and implements.
- The gearbox system of the tractor has 9 forward and 3 reverse speeds.
Cons Of John Deere 4310 Tractor
- The battery terminal connectors are inferior.
Price Of John Deere 4310 Tractor
The original price of the John Deere 4310 tractor was USD 12950. The accurate price of a used tractor depends on the condition and location of the tractor.
The serial number plate of the John Deere 4310 Tractor is located on the rear of the tractor. Below is the chart of serial numbers against their manufacturing year.
John Deere 4310 is a reliable and powerful compact utility tractor. It comes in 2WD and 4WD versions with great features and useful attachments. This article includes all kinds of information about this model. Hopefully, the post will be helpful for you to know more about the John Deere 4310 tractor.
You May Also Like: